HINGE, GUIDE, CLAMP, PIN, ETC. - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REPAIR INSTRUCTIONPRECAUTION › HINGE, GUIDE, CLAMP, PIN, ETC. - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev out shell. Remove clips by prying out pin, and then prying - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › REMOVAL AND INSTALLATION OF VACUUM HOSES - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
INTRODUCTIONHINGE, GUIDE, CLAMP, PIN, ETC. - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
HINGE, GUIDE, CLAMP, PIN, ETC.


Using a screwdriver, detach the claws and remove the cap or cover.


i.
HINGE, GUIDE, CLAMP, PIN, ETC.
i. The removal and installation methods of typical hinges, guides, clamps and pins used for vehicle body parts are shown in the table below.
HINT: If clamps are damaged during a procedure, always replace the cap or cover that has damaged clamps with a new one. Shape (Example) Illustration / Procedures Disengage the pins by pulling.


Disengage the pins by pulling.
‹ Prev out shell. Remove clips by prying out pin, and then prying - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › REMOVAL AND INSTALLATION OF VACUUM HOSES - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.