Inspect Camshaft - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Inspect Camshaft - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Inspect Camshaft
EM–133
2TR-FE ENGINE MECHANICAL – ENGINE UNIT

23. INSPECT EXHAUST VALVE SEAT

(a) Apply a light coat of prussian blue (or white lead) to the valve face. (b) Lightly press the valve face against the valve seat. (c) Check the valve face and valve seat by using to the following procedure. Width (1) If prussian blue appears around the entire valve face, the valve face is concentric. If not, replace the valve. (2) If prussian blue appears around the entire G037410E01 valve seat, the guide and valve face are concentric. If not, resurface the valve seat. (3) Check that the valve seat contacts in the middle of the valve face with the width between
1.0 and 1.4 mm (0.039 and 0.055 in.).
24. INSPECT CAMSHAFT

(a) Check the camshaft for runout. (1) Place the camshaft on V-blocks. EM (2) Using a dial indicator, measure the circle runout at the center journal. Maximum circle runout:
0.03 mm (0.0012 in.) If the circle runout is greater than the maximum, replace the camshaft. G037415E01 (b) Using a micrometer, measure the cam lobe height. Standard cam lobe height:

42.855 to 42.955 mm (1.6872 to1.6911 in.) Minimum cam lobe height:
42.855 mm (1.6872 in.) If the cam lobe height is less than the minimum, replace the camshaft.
G037416E01 (c) Using a micrometer, measure the journal diameter. Standard journal diameter

| No.1 journal | 35.949 to 35.965 mm (1.4153 to 1.4159 in.) |
|---|---|
| Other journal | 26.959 to 26.975 mm (1.0614 to 1.0620 in.) |
If the journal diameter is not as specified, check the oil clearance.
G037417E01
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.