TRIM FOR REAR SEAT BACKREST - R.R.

Operation 7050D30 · REAR SEAT TRIM/PADDING

1.2 8v, 1.3 Multijet, 1.4 16v

Removing

Op. 7050A19 REAR SEAT BACKREST - R.R

Op. 7050A68 LH OR RH PROTECTION (ONE) OF ONE REAR SEAT SQUAB RELEASE MECHANISM R R

Op. 7050A42 REAR BACKREST CATCH DEVICE (ONE) - R+R

- Remove both rear head restraints as described in:

Op. 7050B12 REAR SEAT HEAD RESTRAINT - R.R.

- Remove all the rear head restraint guide bushes as described in:

Op. 7050B08 GUIDE BUSH FOR HEAD RESTRAINT (ONE) FOR REAR SEAT - R.R

Op. 7050A30 REAR SEAT CUSHION COVER - R.R. WITH SEAT REMOVED

Op. 7050A54 REAR SEAT BACKREST FRAME - R.R.

1. Cut the retaining seals (1a) and separate the cover (1b) from the backrest upholstery (1c).

Refitting

- Check that the cover is intact and does not show signs of deterioration or cuts.

- Fit the cover onto the upholstery.

- Using special pliers, attach the new clips in the area where the cover and upholstery are joined.

- Mould the cover on the upholstery taking care that the fabric is taut and not creased.

Op. 7050A54 REAR SEAT BACKREST FRAME - R.R.

Op. 7050A30 REAR SEAT CUSHION COVER - R.R. WITH SEAT REMOVED

- Remove all the rear head restraint guide bushes as described in:

Op. 7050B08 GUIDE BUSH FOR HEAD RESTRAINT (ONE) FOR REAR SEAT - R.R

- Remove both rear head restraints as described in:

Op. 7050B12 REAR SEAT HEAD RESTRAINT - R.R.

Op. 7050A42 REAR BACKREST CATCH DEVICE (ONE) - R+R

Op. 7050A68 LH OR RH PROTECTION (ONE) OF ONE REAR SEAT SQUAB RELEASE MECHANISM R R

Op. 7050A19 REAR SEAT BACKREST - R.R