AIR BAG MODULE - R+R

Operation 5580C18 · AIR BAG SYSTEM

1.2 8v, 1.3 Multijet, 1.4 16v

Removing

1. Release the air bag module (1b) from the three retaining clips behind the steering wheel using the tool (1a).

1. Disconnect the electrical connection for the horn.

2. Disconnect the electrical connections for the Air Bag module.

3. Remove the Air Bag module.

Place the Air Bag module in the special cupboard resting it on a free surface with the bag facing upwards.

Refitting

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.

If a new module is being fitted, position the labels. Remove the removable part of the adhesive label from the new module and place it in a special file giving the vehicle details (model, registration details, chassis no.) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes with the module and should be stuck on top of the existing one. Before sticking it, it should be perforated at the month and 14 years after the year in which the module is being fitted (e.g. 2021 for 2007).

1. Connect the electrical connections for the Air Bag module.

2. Connect the electrical connection for the horn.

3. Fit the Air Bag module in place checking that it is correctly inserted.

- Connect the battery terminals.

- Check for any errors using the Examiner and eliminate them if found.