On board navigation system controls - r.r.
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Special accessories › On board navigation system controls - r.r.
Electrical equipmentOn board navigation system controls - r.r.
ON BOARD NAVIGATION SYSTEM CONTROLS - R.R.
Removing
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
1. Use a suitable tool to prise up the navigator control unit from its housing on the roof panel.
2. Disconnect the electrical connection and remove the navigator control unit.
| Description | Connector | |
|---|---|---|
| 2 | Convergence control panel | See H136 CONVERGENCE CONTROL PANEL |
If the car is equipped with a sliding roof, the associated controls are incorporated in the navigator control unit and therefore the relevant electrical connection must also be disconnected.
| Description | Connector | |
|---|---|---|
| Sun roof switch | See H060 SUN ROOF SWITCH |
Refitting
1. Connect the electrical connection for the navigator control unit.
| Description | Connector | |
|---|---|---|
| 1 | Convergence control panel | See H136 CONVERGENCE CONTROL PANEL |
- If present, also connect the electrical connection for the sliding roof.
| Description | Connector | |
|---|---|---|
| Sun roof switch | See H060 SUN ROOF SWITCH |
2. Fit the navigator control unit in its housing
Parts & tools for this job For 2007 Fiat 500
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.