THIRD BRAKE LIGHT - R+R

Operation 5550D16 · BRAKE AND REVERSING LIGHTS

1.2 8v, 1.3 Multijet, 1.4 16v

Removing

- Disconnect the negative battery terminal.

1. Prise up protective caps (1a) and undo bolts underneath (1b).

1. Disconnect the electrical connections for the third brake light.

1. At the bench, undo bolts (1a) and separate third brake light (1b) from the moulding.

Refitting

- Fit the third brake light to the trim and secure it with the bolts.

1. Connect the electrical connections for the third brake light.

- Position the third brake light into its housing and tighten the bolts.

- Fit the protective caps for the third brake light retaining bolts in their housing.

- Connect the negative battery terminal.