Reversing light switch - r+r
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Warning and manoeuvring indicators › Reversing light switch - r+r
Electrical equipmentReversing light switch - r+r
REVERSING LIGHT SWITCH - R+R
Removing
- Position the vehicle on the lift.
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| BATTERY | See A001 BATTERY |
1. Disconnect electrical connection (1a) and unscrew and remove the reversing lights switch (1b).
| Description | Connector | |
|---|---|---|
| 1a | REVERSING LIGHTS SWITCH | See I020 REVERSING LIGHTS SWITCH |
Refitting
1. Fit the reversing lights switch on the gearbox and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Reverse engagement switch | M18x1.5 | 3.8 | all versions (C514 gearbox) |
2. Secure the electrical connection.
| Description | Connector | |
|---|---|---|
| 1a | REVERSING LIGHTS SWITCH | See I020 REVERSING LIGHTS SWITCH |
- Connect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| BATTERY | See A001 BATTERY |
- Remove the vehicle from the lift.
Parts & tools for this job For 2007 Fiat 500
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.