R.R. BONNET

Operation 7210E20 · EXTERNAL PARTS

Removing

Op. 7025A22 SOUNDPROOFING LINING FOR BONNET LID - R+R

1. Disconnect the retainer for the screen washer fluid pipe.

2. Disconnect the screen washer fluid pipe from the three-way connector.

3. Support the bonnet lid appropriately and, working on both sides of the vehicle, undo the hinge fixing bolts.

4. Keep the bonnet.

Refitting

- Check that the bonnet is not damaged.

- Position the bonnet and screw in the hinge fixing bolts (without tightening them).

- Connect the screen washer fluid pipe to the three-way connector.

- Connect the retainer for the screen washer fluid pipe.

Op. 7025A22 SOUNDPROOFING LINING FOR BONNET LID - R+R

Op. 7025A10 BONNET LID - ALIGNMENT