Front crankshaft cover oil seal - r.r.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R.

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

- Prise up the oil seal and remove it.

Refitting

1. Use the tool to fit a new oil seal.

Tool	Description	Function	Validity
1860990000	Fitting tool	Fitting oil seal	1.4 16v

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 5510D10 SPARK PLUGS - R+R

Op. 5510C14 IGNITION COIL/S - R.R.

Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.

Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1.9 JTD 8v

Removing

- Position the vehicle on a lift.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

1. Release and remove the crankshaft front oil seal cover.

Take care not to damage the oil seal seal during its removal.

The oil seal is ruined during the removal operation so it must always be replaced.

Refitting

1. Fit a new the crankshaft front cover oil seal (1a) in the housing using the tool (1b).

Tool	Description	Function	Validity
1871000500	Fitting tool	Fitting crankshaft front oil seal	1.9 JTD

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.

Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

- Remove the vehicle from the lift.

1.9 JTD 16v

Removing

- Position the vehicle on a lift.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - R + R

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

1. Release and remove the crankshaft front oil seal cover.

Take care not to damage the oil seal seal during its removal.

The oil seal is ruined during the removal operation so it must always be replaced.

Refitting

1. Fit a new the crankshaft front cover oil seal (1a) in the housing using the tool (1b).

Tool	Description	Function	Validity
1871000500	Fitting tool	Fitting crankshaft front oil seal	1.9 JTD

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - R + R

Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

- Remove the vehicle from the lift.

1.4 16v TJet

Removing

Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R.

Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.

Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Refitting

1. Use the tool to fit a new oil seal.

Tool	Description	Function	Validity
1860990000	Fitting tool	Fitting oil seal	1.4 16v

Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R

Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.

Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.

Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R.