Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)19 · Wiring diagrams and electrical functions
19 · Electrical

Reversing lights - description

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Exterior lighting › Reversing lights - description
Wiring diagrams and electrical functionsReversing lights - description

REVERSING LIGHTS - DESCRIPTION

DESCRIPTION

The vehicle is equipped with a white reversing light located in the rear bumpers, on the right (on the left on right hand drive versions).

It is activated each time reverse gear is engaged: this information is received via a switch located on the outside of the gear casing.

The reversing light circuit is supplied by an ignition-operated relay and protected by a dedicated fuse in the junction unit under the dashboard.

The reverse engagement signal is also sent to the steering column switch unit for the automatic operation of the rearscreen wiper and via the CAN to the Body Computer which forwards the information to the parking sensor control unit etc.

See E3021 REAR WINDOW WASH/WIPE

See E3090 PARKING SENSOR

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.