Removing-refitting electric fuel pump

Removing-refitting electric fuel pump

Proceed with the removal of the pump as follows:

• working from the luggage compartment, remove the cover to gain access to the pump housing cover;
• undo the three fixing bolts (arrow) and remove the cover (1);
• undo the union (2) fixing the breather pipe and remove the pipe;
• disconnect the electrical connector for the fuel level gauge (3) and the one for the pump (4) supply;
• remove the rapid attachment fuel supply (5) and return (6) unions from the tray;

NOTE When removing and refitting the rapid unions, refer to the procedures given in the service notes.

• fit tool 1860893000 on the tray fixing flange, taking care to insert it correctly between the projections on the flange, as shown in the diagram;
• undo the flange and remove it together with the tool, then carefully remove the tray complete with seal.