DOLBY B Function

DOLBY B Function

Press the button (1) to activate / deactivate the Dolby B function (noise limited device produced under licence by the "Dolby Laboratories Licensing Corporation") (*).

When the Dolby function is activated the symbol appears on the display.

(*) Dolby and the (double D symbol) are the registered trade marks of the above company.

Audio cassette ejection

To eject the cassette from the housing, slide the control (2) to the right until the exit.

• After ejection, the word "TAPE" appears on the display and the radio operates, tuned into the last station listened to.

The audio cassette cannot be ejected with the radio switched off.

Temporary halt whilst listening to a cassette

It is possible to temporarily stop listening to a cassette by pressing the MODE button; listening to a cassette can be resumed by pressing it again.

Never expose audio cassettes to heat or direct sunlight, always store them in their container after use.
It is advisable to use good quality tapes not longer than C-90 in order to ensure optimum reproduction.
Impurities on the head caused by tapes can, in time, cause a deterioration in the high tones during reproduction, therefore it is advisable to clean the head periodically using a special, non abrasive, cleaner.