Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Ejecting the cassette.

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Radio equipment (98 range) › Ejecting the cassette.
55 Electrical systemEjecting the cassette.
Diagram of the radio control panel showing numbered callouts 1 and 2 pointing to buttons, with labels BN, TP, 4, 5, EXP, m-, and m+ visible on the interface.

Ejecting the cassette.

To eject the cassette from the audiocassette housing, briefly press buttons 1 and 2 simultaneously.

After the audio cassette has been ejected, the message "TAPE" will appear on the display and the radio will operated, tuned into the last transmitter listened to.

EXPERT control level

Using the EXPERT additional level it is possible to carry out different adjustments which may only be necessary once, for example, setting the exact time, or occasional adjustments such as, for example, the adjustment of the minimum volume for traffic news.

List of possible EXPERT adjustments

The following adjustments can be carried out using the EXPERT control level:

  1. Setting the time
  2. Switching the clock RDS tuning on/off
  3. Traffic news minimum volume
  4. LRN on/off
  5. Regional programme automatic change on/off
  6. LOC on/off
  7. MONO on/off
  8. LOUDNESS on/off
  9. FADER on/off
  10. Limiting volume when switching on
  11. BDLY delay in switching BOOSTER connected on/off
  12. Switching on/off via ignition
  13. Audio mute during operation of car phone
  14. Telephone input sensitivity
Diagram of the radio control panel showing numbered callouts 1, 2, and 3 pointing to buttons, with labels BN, TP, 4, 5, EXP, m-, and m+ visible. The word EXPERT appears in a box at the bottom of the diagram.

Selecting and modifying the adjustments using the EXPERT control level.

Press the EXP button (1) until the message "EXPERT" appears on the display.

Using buttons "▲" (2) and "▼" (3) select the desired adjustment.

By pressing the frequency selection buttons it is possible to set the desired level.

The frequency selection buttons involved depend on the desired adjustment.

For their identification, refer to the paragraphs which follow dealing with the individual possible adjustments.

To end the adjustment, press the EXP button for about 3 seconds.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.