Manual programming of a transmitter

Manual programming of a transmitter

Select the frequency by repeatedly pressing the BAND control (1). The display will show the band selected: "FM1", "FM2", "FM3", "MW" or "LW". Press one of the buttons "▲" "▼" (2,3) for about 6 seconds until the message "MAN" appears on the display and the radio frequency is tuned in. It is possible to alter the tuning frequency using the "▲" "▼" buttons. The station being listened to can be memorized in the frequency range selected using the frequency selection buttons (1,2,3,4,5,6). To programme it press the pre-selected frequency selection button until the radio can be heard once again. The manual tuning can be concluded at any time by pressing one of the frequency selection buttons or if no buttons are pressed for sixty seconds.

Listening to programmed stations

Proceed as follows: 1. Select the desired band using the BAND control (1). 2. Briefly press one of the frequency selection buttons (1,2,3,4,5,6). The display will show the button pressed and the transmitter code if it is an RDS transmitter. If the transmitter selected offers an RDS service and the reception is not good, the radio will search for an alternative frequency. The display will show "SRC" during the search.

TP Function (TRAFFIC PROGRAM)

Several stations belonging to RDS1, RDS2 bands also broadcast traffic news. With the TP (Traffic Program) function it is possible to: a) search for RDS stations only broadcasting traffic news; b) receive traffic news even if the cassette player or Compact Disc player are working; c) receive traffic news at a pre-set quiet volume even with radio volume at zero.