Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)18 · Body panels and frame
18 · Body & interior

R.r rear crossmember

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Removing-refitting › R.r rear crossmember
Body panels and frameR.r rear crossmember

R.R REAR CROSSMEMBER

Operation 7210B82 · STRUCTURAL ELEMENTS (CENTRE AND REAR SECTION)

Removing

- Turn the ignition key to the OFF position.

- Open the bonnet.

- Disconnect the negative battery terminal.

DescriptionConnector
BATTERYSee A001 BATTERY

Follow all the recommended safety instructions.

Op. 5580C AIR BAG SYSTEM

Follow the instructions for handling speakers.

Op. 5570 ACCESSORIES

- Position the vehicle on the lift and raise it.

(both)

Op. 5540A56 EXTERIOR REAR LIGHT (ONE), LEFT OR RIGHT - R.R.

Op. 4450B13 REAR WHEELS (TWO) - R.R

Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R

Op. 7040B26 LOAD PLATFORM COVER BLIND - R+R

Op. 7040B42 PROTECTION GRILLE FOR ANIMAL TRANSPORT - R and R

(both)

Op. 7040G46 LOAD COMPARTMENT COURTESY LIGHT - R and R

(both)

Op. 7050A47 SIDE PANEL ONE OF REAR SEAT SQUAB LH OR RH R R

Op. 7040B24 LOAD COMPARTMENT TOP TRIM (ONE) - R+R

Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R

Op. 7040B18 LOAD COMPARTMENT LOAD PLATFORM SIDE TRIM ONE LH OR RH - R.R

Op. 5570T95 SUBWOOFER WITH AMPLIFIER BUILT INTO SOUND SYSTEM - R.R.

Op. 7210E66 R.R. REAR BUMPER

1. Unscrew the nuts securing the rear sacrificial beam.

2. Remove the rear sacrificial beam.

R.R REAR CROSSMEMBER

Refitting

- Check that the rear sacrificial beam is not damaged.

- Position the beam in its seat and tighten the nuts to secure it to the body.

ComponentFasteningdiaValue (daNm)Validity
CRASH BOX CROSSMEMBER TO FRONT CROSSMEMBERBoltM60,64 ÷ 0,96

Op. 7210E66 R.R. REAR BUMPER

Op. 5570T95 SUBWOOFER WITH AMPLIFIER BUILT INTO SOUND SYSTEM - R.R.

(both)

Op. 7040B18 LOAD COMPARTMENT LOAD PLATFORM SIDE TRIM ONE LH OR RH - R.R

Op. 7040B10 LOAD PLATFORM (LUGGAGE PLATFORM) TRIM - R+R

(both)

Op. 7040B24 LOAD COMPARTMENT TOP TRIM (ONE) - R+R

(both)

Op. 7050A47 SIDE PANEL ONE OF REAR SEAT SQUAB LH OR RH R R

(both)

Op. 7040G46 LOAD COMPARTMENT COURTESY LIGHT - R and R

Op. 7040B42 PROTECTION GRILLE FOR ANIMAL TRANSPORT - R and R

Op. 7040B26 LOAD PLATFORM COVER BLIND - R+R

Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R

Op. 4450B13 REAR WHEELS (TWO) - R.R

(both)

Op. 5540A56 EXTERIOR REAR LIGHT (ONE), LEFT OR RIGHT - R.R.

- Connect the negative battery terminal.

DescriptionConnector
BATTERYSee A001 BATTERY

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.