REMOVAL-REFITTING - GENERAL REMARKS

Below is the graphic index and description of the symbols that appear in the repair procedures.

Symbols

1. Cutting with alternating saw

2. Cutting with circular blade saw

3. Cleaning with rotary brush

4. Removing spot welds with chamfering machine

5. Removing spot welds with drill. Drilling for MIG welding

6. Removing body panel with chisel. Drilling for MIG welding

7. Applying electro-weldable protectives

8. Applying high thickness electro-weldable protectives

9. Centering components

10. Measurement

11. Fastening components

12. Fastening threaded rivets

13. Checking alignment gaps

14. Straightening edges with hammer and dolly block

15. Removing spot welds with hammer and chisel

16. Removing treatment with power knife

17. Spot welding

18. MIG welding

19. Welding with oxy-acetylene torch

20. Grinding

21. Applying anti-oxidant protectives

22. Application of sealants

23. Application of underbody protection

24. Application of paint

25. Application of protective waxes

26. Application of foam products

27. Heating with hot air

28. Removing metal offcuts

Process symbols

Below are the work symbols that are described in the repair procedure with an example of their application. In the illustrations for the procedures, next the number of the procedure steps for welding operations, sometimes there are numbers in brackets that indicate the number of spot welds to be made or filled by MIG welding.

Cutting with a power saw or chisel

Spot welding.

Spot welding (three panels)

MIG welding - seam - sections

Brazing

MIG fill welding

Sealing