ENGINE OIL FILLER - R.R.

Operation 1084A22 · INDICATORS/CHECK DEVICES

1.9 JTD 16v, 2.4 JTD 20v

Removing

Op. 5530B10 BATTERY - R+R

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Disconnect the rapid connector for the vacuum intake pipe from the vacuum pump.

2. Loosen the band and disconnect the oil vapour recovery pipe from the engine oil filler.

1. Disconnect the electrical connection from the engine coolant temperature sensor.

2. Undo the bolts (2a) and remove the engine oil filler (2b).

3. Remove the gasket.

Refitting

- Place the gasket back in its housing.

- Place the engine oil filler fitting in its housing and secure it by tightening the bolts to the recommended torque.

- Connect the electrical connection to the engine coolant temperature sensor.

- Connectt the oil vapour recovery pipe to the engine oil filler fitting and tighten the band.

- Connect the rapid connector for the vacuum intake pipe to the vacuum pump.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 5530B10 BATTERY - R+R