LINES TO INJECTORS - R R

Operation 1060F36 · INJECTORS AND LINES

2.3 JTD 16V

Removing

1. Undo the connectors for the pipes from the injectors.

2. Undo the connectors for the pipes from the single fuel manifold.

3. Remove the pipes connecting the fuel manifold to the injectors.

Refitting

- Fit the new pipes from the manifold to the injectors.

Each time work is carried out on the pipes from the injectors to the fuel manifold, they have to be replaced with new ones to prevent fuel leaks from the connectors.

- Tighten the connectors for the pipes on the injectors to torque.

- Tighten the connectors for the pipes on the manifold to torque.

2.8 JTD 8V

Removing

See in Op. 1048B22

See in Op. 1048B14

1. Working on the fastening springs (1a) remove the sound insulation cover inspection flap (1b).

2. Undo the connectors (2a) and remove the fuel supply pipe to the injectors (2b).

- Carry out the same operation for all the pipes from the manifold to the injectors.

Refitting

- Fit the fuel pipe in place.

- Tighten the connectors checking the torque.

- Carry out the same operation for all the pipes from the manifold to the injectors.

- Fit the inspection cover and secure it using the springs.

See in Op. 1048B14

See in Op. 1048B22

2.0 JTD 8V

Removing

- Disconnect the negative battery terminal.

1. Disconnect the electrical connections for the injectors.

2. Undo the pipe connectors from the injectors.

3. Undo the pipe connectors from the single fuel manifold.

4. Remove the pipes connecting the fuel manifold and the injectors.

Refitting

- Fit the new pipes from the manifold to the injectors.

Each time work is carried out on the pipes between the injectors and the fuel manifold, they have to be replaced with new ones to prevent fuel leaks from the connectors.

- Tighten the pipe connectors on the return manifold and on the injectors to torque.

- Connect the electrical connections for the injectors.

- Connect the negative battery terminal.