COOLANT INLET SLEEVE TO WATER PUMP - R + R

Operation 1088D20 · COOLANT HOSES AND SLEEVES

2.0 16V

Removing

Op. 4450B04 RIGHT FRONT WHEEL R R

Op. 7055B54 UNDER-ENGINE GUARD - R R

Position a container to collect the coolant.

1. Open the retaining bands.

2. Remove the coolant hose.

Recover the coolant.

Refitting

Fit the sleeve and refit the retaining bands.

Op. 7055B54 UNDER-ENGINE GUARD - R R

Op. 4450B04 RIGHT FRONT WHEEL R R

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

2.8 JTD 8V

Removing

Op. 1048A21 FILTER INPUT SLEEVE - R R

- Position a suitable container for collecting the engine coolant.

1. Open the retaining band (1a) and release the hose (1b).

Op. 7055B54 UNDER-ENGINE GUARD - R R

1. Open the fastening band.

2. Release the hose from the rigid pipe and remove it.

Refitting

- Fit the hose on the rigid pipe and secure it using a retaining band.

- Fit the hose on the coolant reservoir.

Op. 1048A21 FILTER INPUT SLEEVE - R R

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

Op. 7055B54 UNDER-ENGINE GUARD - R R