COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R.

Operation 1088D67 · COOLANT HOSES AND SLEEVES

2.8 JTD 8V

Removing

- Position a suitable container for collecting the engine coolant.

1. Open the retaining bands (1a) and release the pipe (1b) from the coolant reservoir and the pipe (1c) from the thermostat.

2. Undo the fixing nuts (2a) and remove the pipe (2b) complete with mounting bracket.

Refitting

- Place the pipe, complete with mounting bracket, in position.

- Tighten the retaining nuts.

- Connect the pipes to the thermostat and to the coolant reservoir and renew the retaining bands.

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

Op. 7055B54 UNDER-ENGINE GUARD - R R