Thermostat - r + r with cylinder head removed
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine cooling › Thermostat - r + r with cylinder head removed
EngineThermostat - r + r with cylinder head removed
THERMOSTAT - R + R WITH CYLINDER HEAD REMOVED
Removing
1. Undo the nuts and the bolts fixing the thermostat.
2. Remove the thermostat (2a) and seal (2b).
Refitting
- Fit a new seal.
- Position the thermostat on the cylinder head and tighten the fixing nuts and bolts, checking the torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 1,8 | Bolt | THERMOSTAT | M8 |
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.