Sender unit for water temperature gauge - r + r
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine cooling › Sender unit for water temperature gauge - r + r
‹ Prev Resistor for radiator cooling fan - r + rNext › Radiator cooling fan/s wiring bundle - r r or replace
EngineSender unit for water temperature gauge - r + r
SENDER UNIT FOR WATER TEMPERATURE GAUGE - R + R
Removing
Disconnect the negative battery terminal.
Vedere in Op. 1048A21
1. Disconnect the electrical connection.
| Description | Connector | |
|---|---|---|
| 1 | Coolant temperature sending unit (for instrument panel) | K035 |
2. Undo the sender unit and remove it.
Refitting
Tighten the sensor to the thermostat.
Connect the electrical connection.
| Description | Connector | |
|---|---|---|
| Coolant temperature sending unit (for instrument panel) | K035 |
Reconnect the negative battery terminal.
Vedere in Op. 1048A21
‹ Prev Resistor for radiator cooling fan - r + rNext › Radiator cooling fan/s wiring bundle - r r or replace
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.