Dipped beams operational description
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Exterior lighting › Dipped beams operational description
Wiring diagrams and electrical functionsDipped beams operational description
DIPPED BEAMS OPERATIONAL DESCRIPTION
Operational Description
The dipped beams are activated by an earth signal from stalk unit H005 when the wheel is operated and reach control panel H090 at pin 17 connector D.
Once a dipped beam activation command is received, control panel H090 excites T02 inside engine bay junction unit B001, from pin 8 connector A at pin 12 connector C of the junction unit. The relay then supplies power to front headlamps F010 and F011 via fuses F15 and F14 located in engine bay junction unit B001.
The left headlamp signal is used to operate the headlamp alignment corrector (see E3080).
Parts & tools for this job For 2002 Fiat Ducato
- PARTReplacement bulbsSearch: Fiat Ducato 2002 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.