REVERSING LIGHTS OPERATIONAL DESCRIPTION

Combi, Minibus, Panorama, Van

Operational Description

The reversing light activation signal leaves switch I020, located in gear casing, ignition-operated (INT/A) via a connection between ignition switch H001 and pin 48 connector C of under-facia junction unit B002. Power is supplied to short-circuit junction D097D - pin 1- via fuse F31 housed in the junction unit. The short-circuit junction supplies, in turn, reversing light switch I020 from pin 5.

When reverse is engaged, switch I020 closes - across pin 1 and pin 2 - and sends a signal to short-circuit junction D097D, pin 7, that governs activation of the respective bulbs housed in tail-lights F030 F031.

A signal also comes from parking sensor control unit (see function E3090).

2.8 JTD 8V · Automatic Transmission, Combi, Minibus, Panorama, Van

Operational Description

The reversing light activation signal leaves switch I081, ignition-operated (INT/A) via a connection between ignition switch H001 and pin 48 connector C of under-facia junction unit B002. Power is supplied to short-circuit junction D097D - pin 1- via fuse F31 housed in the junction unit. The short-circuit junction supplies, in turn, reversing light switch I081 from pin 5.

When reverse is engaged, switch I081 closes - across pin G and pin H - and sends a signal to short-circuit junction D097D, pin 7, that governs activation of the respective bulbs housed in tail-lights F030 F031.

A signal also comes from parking sensor control unit (see function E3090).

2.8 JTD 8V · Automatic Transmission, Chassis cab

Operational Description

The reversing light activation signal leaves switch I081, ignition-operated (INT/A) via a connection between ignition switch H001 and pin 48 connector C of under-facia junction unit B002. Power is supplied to short-circuit junction D097D - pin 1- via fuse F31 housed in the junction unit. The short-circuit junction supplies, in turn, reversing light switch I081 from pin 5.

When reverse is engaged, switch I081 closes - across pin G and pin H - and sends a signal to short-circuit junction D097D, pin 7, that governs activation of the bulb housed in tail-light F031.

A signal also comes from parking sensor control unit (see function E3090).

Chassis cab

Operational Description

The reversing light activation signal leaves switch I020, located in gear casing, ignition-operated (INT/A) via a connection between ignition switch H001 and pin 48 connector C of under-facia junction unit B002. Power is supplied to short-circuit junction D097D - pin 1- via fuse F31 housed in the junction unit. The short-circuit joint supplies, in turn, reversing light switch I020 from pin 5.

When reverse is engaged, switch I020 closes - across pin 1 and pin 2 - and sends a signal to short-circuit junction D097D, pin 7, that governs activation of the bulb housed in tail-light F031.

A signal also comes from parking sensor control unit (see function E3090).