Main beams operational description
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Exterior lighting › Main beams operational description
MAIN BEAMS OPERATIONAL DESCRIPTION
Operational Description
The main beams are activated by an earth signal from stalk unit H005 - pin 2 connector B - by turning the wheel.
Control panel H090 receies a dipped beam activation signal at pin 16 of connector D, and controls activation of a warning light on control panel E050 - pin 11 connector D -. Control panel H090, via pin 6 of connector A, excites relay T14 located in engine bay junction unit B001, which supplies power to front lights F010 and F011. The line is protected by fuse F30, also located in engine bay junction unit B001.
Junction unit B001 receives a power supply from ignition switch H001 (15/54) and directly from the battery, via protective fuse F70, located in the battery control unit.
Parts & tools for this job For 2002 Fiat Ducato
- PARTReplacement bulbsSearch: Fiat Ducato 2002 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.