18 · Body & interior

R.r. rear side door

Body panels and frameR.r. rear side door

R.R. REAR SIDE DOOR

Operation 7210E38 · EXTERNAL PARTS

- Lower the window to the end of travel position.

1. Undo the bolts (1a) fixing the limiter link (1b) to the body, then close the door momentarily so that the link is inside.

2. Disconnect the electrical connection.

Description	Component
LEFT REAR DOOR COUPLING	See D035 LEFT REAR DOOR COUPLING
RIGHT REAR DOOR COUPLING	See D036 RIGHT REAR DOOR COUPLING

3. Undo the bolts for the hinges.

4. Lift up the door and remove it.

- Check that the door is not damaged.

1. Place the door on the hinges.

2. Tighten the bolts for the hinges to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Moving hinges on fixed	Bolt	M6	1.2 ÷ 1.8

3. Connect the electrical connection.

- Check that the various consumers on the door are working.

4. Pull out limiter (4a) out and tighten the bolt (4b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Door check strap (bodyshell side)	Bolt	M8	2.25 ÷ 2.75

- Check the door alignment and, if necessary, carry out:

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.