Rear creaking
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Noise / vibrations › Rear creaking
REAR CREAKING
With the vehicle moving, particularly over rough ground or during acceleration or braking, noise can be heard from the rear of the passenger compartment
| Test results | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Check that the noise is actually coming from the rear of the passenger compartment | Move on to Step 1 | The noise is coming from one of the rear doors | Proceed as instructed | |
| 1 | REAR SEAT FASTENINGS CHECK | All OK | Problems encountered | Operation |
Check the correct fastening: - of the cushion to the body; - of the backrest to the luggage compartment bulkhead; - of the rear seat belt mountings to the body | Move on to Step 2 | 1. Seat fastenings not correct 2. Rear seat belt fastening not correct | 1. Renew the correct fastening Op. 7050A14 SPLIT REAR SEAT ASSEMBLY - R+R 2. Renew the correct fastening | |
| 2 | REAR PARCEL SHELF CHECK | All OK | Problems encountered | Operation |
Remove the rear parcel shelf and check: - For the presence of noise prevention rubber mountings on the rear parcel shelf rear hooks; - That the elements on the rear parcel shelf (e.g. speakers) are correctly fastened; - That the boot wiring coupling is correctly insulated | Move on to Step 3 | 1. Rubber mountings or insulation missing 2. Fastenings faulty | 1. Renew the rubbing mountings and insulating material 2. Restore the correct fastening of the elements to the rear parcel shelf | |
| 3 | REAR PILLAR COVER CHECK | All OK | Problems encountered | Operation |
Remove the pillar covers and check: - for the presence of the felt between the pillar cover and the pillar; - for the presence of the felt between the pillar cover and the rear parcel shelf | Move on to Step 5 | Felt missing | Renew felt | |
| 4 | SPLIT SEAT CHECK | All OK | Problems encountered | Operation |
| Remove the seat and check that the welding for the backrest perimeter joining back is correct | End of diagnosis | Welding faulty | Replace the seat assembly | |
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Grande Punto
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.