Coil springs
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (Panda D) › Coil springs
00 Introduction and technical dataCoil springs
Rear suspension rigid axle, Ω shaped tubular construction with central hinges and longitudinal reaction arms.
Helical springs and double acting, telescopic shock absorbers.
Coil springs
| Height of spring under a load of: 257 daN |
mm | 170 |
|---|---|---|
| The springs are subdived into two categories, identifiable by a mark: yellow (1) for those under a load of 257 daN having a height of mm |
> 170 | |
| green (1) for those under a load of 257 daN having a height of mm |
≤170 |
(1) Springs of the same category must be fitted.
Shock absorbers
| Type: telescopic, double acting | Way-Assauto |
|---|---|
| Open | mm 420 ± 3 |
| Closed (metal against metal) | mm 252 ± 3 |
| Travel | mm 168 |
Parts & tools for this job For 1986 Fiat Panda
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Fiat Panda 1986 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.