Front suspension
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Technical data (Panda D) › Front suspension
00 Introduction and technical dataFront suspension
Front suspension
Front suspension independent with lower track control arms and telescopic dampers with steering knuckle rigidly connected to the double acting hydraulic shock absorber.
Coil spring with buffers co-axial to the shock absorbers.
For life joints
Coil springs
| Height of spring under a load of: 275 ± 11 daN mm | 213 |
|---|---|
| The springs are subdivided into two categories, identifiable by a mark: yellow (1) for those under a load of 275 ± 11 daN having a height of mm | > 213 |
| green (1) for those under a load of 275 ± 11 daN having a height of mm | ≤213 |
(1) Springs of the same category must be fitted.
Shock absorbers
| Type: telescopic, double acting | Way-Assauto |
|---|---|
| Open mm | 428,5 ± 2 |
| Closed (metal against metal) mm | 282 ± 2 |
| Travel mm | 146,5 |
Parts & tools for this job For 1986 Fiat Panda
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Panda 1986 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.