Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)20 · Wiring diagrams and electrical functions
20 · Electrical

Brake lights - description

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Interior lighting › Brake lights - description
Wiring diagrams and electrical functionsBrake lights - description

BRAKE LIGHTS - DESCRIPTION

1.3 JTD 16v · SUV

Description

The vehicle brake lights are located at the rear in the side light clusters and in the special central third brake light.

All the bulbs are operated each time the brake pedal is pressed via a switch on the actual pedal.

The circuit is supplied with the key ON and is protected by a specific fuse located in the junction unit under the dashboard.

The braking signal is also taken from the ABS.

All versions

Description

The brake lights are located at the rear in the side lights and in the central third brake light.

All three bulbs are operated whenever the brake pedal is pressed, by means of a switch on the pedal itself.

The circuit is supplied with the ignition switched ON and is protected by a fuse, in the junction unit under the facia.

The braking signal is also taken from the ABS system (where fitted).

Parts & tools for this job For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.