MAIN BEAM HEADLAMPS - Description

Description

The vehicle has two special lamps for the main beam headlamps.

These are switched on:

• with the dipped beam headlamps switched on by pushing the steering column switch unit lever towards the dashboard (stable mode)
• in 'flash' mode, by pulling the lever towards the steering wheel (unstable mode)

Thr circuit is protected by a special fuse and controlled by a relay, both located in the junction unit in the engine compartment.

A warning light in the instrument panel signals that the main beam headlamps have been switched on.

During engine start-up (key ON), the high beams are temporarily off and then turned back on when the engine is started.