1088d - coolant hoses and sleeves overview (page 2 of 2)

(Op. 1088D10 continued)

2. Remove the engine compartment protection.

1. Take out the engine coolant lower outlet sleeve from the radiator and drain the coolant into a suitable container.

1. Unscrew the engine coolant supply tank fastening screws and take it from the support.
2. Take out the engine coolant supply hose from the tank.

• Take out the engine cooling system supply hoses from the straps on the rear of the engine cooling radiator.

1. Take the sleeve from the coolant inlet hose to the water pump.

• Take out the pipe carrying water to the heater (see Op. 5010A12 PIPE carrying water to heater - R+R.).
• Remove the coolant lower outlet sleeve.

(Cont.)