Refitting (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine cooling (899)
10 EngineRefitting · page 2 of 2
- Insert the sleeve on the engine coolant tank.
- Refit the engine coolant tank and fasten with its screws.
- Raise the vehicle.
- Insert the engine water pump inlet sleeve on the pump.
- Assemble the engine compartment protection and fasten with its screws.
- Lower the vehicle.
- Connect the negative (-) battery terminal
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Fill the engine cooling system with coolant
| Type | Component | Name | Qty | |
|---|---|---|---|---|
| - | Coolant (I) | ENGINE COOLING SYSTEM | Paraflu11 | 4.8 |
- Remove the body protection cover.
- Close the engine compartment.
- Remove the vehicle from the hoist.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.