Flywheel side oil seal cover - r+r

Operation 1020D26 · Oil seals on crank shaft

1.2 16v

Removing

Place the car on a ramp.

- 4450B12 front or rear wheels (two) - r+r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1048A10 air cleaner filtering element - replace

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1072C16 exhaust manifold with catalytic converter - r r

- 2110A10 manual gearbox and differential - r + r

- 1810A24 clutch - r + r with gearbox removed

- 1024B22 engine flywheel - r r with clutch or gearbox removed

- 1020A30 engine oil drain plug - replace

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1020D30 oil seal cover, fly wheel side - r + r and replace seals

1.4 16v

Removing

Place the car on a lift.

- 4450B12 front or rear wheels (two) - r+r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1048A10 air cleaner filtering element - replace

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1072C16 exhaust manifold with catalytic converter - r r

- 2110A10 manual gearbox and differential - r + r

- 1810A24 clutch - r + r with gearbox removed

- 1024B22 engine flywheel - r r with clutch or gearbox removed

- 1020A30 engine oil drain plug - replace

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1020D30 oil seal cover, fly wheel side - r + r and replace seals

1.6 16v

Removing

Place the vehicle on a ramp.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 4450B10 Front WHEEL (one) - R.R.

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1008C32 GEARBOX LOWER REACTION ROD ' -R.R.

- 1008B30 gearbox side mount flexible block - replace

- 2110A10 manual gearbox and differential - r + r

- 1810A24 clutch - r + r with gearbox removed

- 1024B22 engine flywheel - r r with clutch or gearbox removed

- 1020D30 oil seal cover, fly wheel side - r + r and replace seals

2.4 20v

This operation should be carried out with the engine at the bench. After having remove the power unit, separate the gearbox - differential unit from the engine and position the latter on the rotating stand for overhauling.

Remove the crankshaft cover oil seal, referring to the operations illustrated in the manual for overhauling this engine at the bench.

1.9 JTD 8v

This operation should be carried out with the engine at the bench. After having remove the power unit, separate the gearbox - differential unit from the engine and position the latter on the rotating stand for overhauling.

Remove the crankshaft cover oil seal, referring to the operations illustrated in the manual for overhauling this engine at the bench.

1.9 JTD 16v

This operation should be carried out with the engine at the bench. After having remove the power unit, separate the gearbox - differential unit from the engine and position the latter on the rotating stand for overhauling.

Remove the crankcase sump.

Remove the crankshaft cover oil seal, referring to the operations illustrated in the manual for overhauling this engine at the bench.

1.2 16v

Refitting

- 1020D30 oil seal cover, fly wheel side - r + r and replace seals

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1020A30 engine oil drain plug - replace

- 1024B22 engine flywheel - r r with clutch or gearbox removed

- 1810A24 clutch - r + r with gearbox removed

- 2110A10 manual gearbox and differential - r + r

- 1072C16 exhaust manifold with catalytic converter - r r

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1048A10 air cleaner filtering element - replace

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 4450B12 front or rear wheels (two) - r+r

- 0010T11 engine oil check level and top up

Remove the vehicle from the ramp.

1.4 16v

Refitting

- 1020D30 oil seal cover, fly wheel side - r + r and replace seals

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1020A30 engine oil drain plug - replace

- 1024B22 engine flywheel - r r with clutch or gearbox removed

- 1810A24 clutch - r + r with gearbox removed

- 2110A10 manual gearbox and differential - r + r

- 1072C16 exhaust manifold with catalytic converter - r r

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1048A10 air cleaner filtering element - replace

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 4450B12 front or rear wheels (two) - r+r

- 0010T11 engine oil check level and top up

Remove the vehicle from the lift.

1.6 16v

Refitting

- 1020D30 oil seal cover, fly wheel side - r + r and replace seals

- 1024B22 engine flywheel - r r with clutch or gearbox removed

- 1810A24 clutch - r + r with gearbox removed

- 2110A10 manual gearbox and differential - r + r

- 1008B30 gearbox side mount flexible block - replace

- 1008C32 GEARBOX LOWER REACTION ROD ' -R.R.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 7055B54 under-engine guard - r r

- 4450B10 Front WHEEL (one) - R.R.

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Remove the car from the ramp.