Front crank shaft cover oil seal - replace

Operation 1020D18 · Oil seals on crank shaft

1.2 16v

Removing

Place the car on a ramp.

- 1048A10 air cleaner filtering element - replace

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1092B60 alternator drive belt - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

1. Remove the crankshaft cover oil seal.

1.4 16v

Removing

Place the car on a lift.

- 1048A10 air cleaner filtering element - replace

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1092B60 alternator drive belt - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

1. Remove the crankshaft cover oil seal.

1.6 16v

Removing

Place the vehicle on a ramp.

- 1016A10 sound-proofing cover - r + r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 4450B10 Front WHEEL (one) - R.R.

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A46 cam shaft left rigid mount - r r

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1036G49 rear camshaft seal, lh or rh - r r with mount and coil/s removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed

Remove the front crankshaft cover oil seal using a screwdriver.

2.4 20v

Removing

Place the car on a lift.

- 4450B04 right front wheel r r

- 7055B54 under-engine guard - r r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1092D10 air conditioner compressor drive belt - r + r

- 1092B68 belt from a/c compressor to alternator drive r + r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

- 1016A40 ignition coil cover on cylinder head- r+r

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1032B44 toothed drive pulley - r + r with timing belt removed.

Remove the oil seal from the crankshaft front cover.

Take care not to damage the housing in the front cover.

1.9 JTD 16v

Removing

Place the car on a lift.

- 4450B04 right front wheel r r.

- 1016A10 sound-proofing cover - r + r.

Disconnect the battery negative terminal.

- 7055B54 under-engine guard - r r.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R..

- 1092G10 single engine belt r r.

- 1092G14 engine component single belt mobile tensioner - r + r.

- 1092G21 engine component single belt fixed tensioner - r rwith belt removed

- 1032D12 timing system protective cover(s) - r + r.

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

- 1032B44 toothed drive pulley - r + r with timing belt removed.

Remove the oil seal from the housing in the front cover.

The operation of removing the oil seal destroys it, therefore it must always be replaced.

1.2 16v

Refitting

1. Using the tool, insert the new crankshaft cover oil seal.

1.4 16v

Refitting

1. Using the tool, insert the new crankshaft cover oil seal.

1.6 16v

Refitting

1. Fit a new crankshaft front cover oil seal (1a) using the tool (1b).

2.4 20v

Refitting

1. Fit a new oil seal (1a) on the crankshaft front cover using the tool (1b).

1.9 JTD 16v

Refitting

1. Fit a new oil seal (1a) by using tool (1b) to insert into its seat on the front cover.

1.2 16v

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1092B60 alternator drive belt - r + r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 1048A10 air cleaner filtering element - replace

Remove the vehicle from the ramp.

1.4 16v

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1032D12 timing system protective cover(s) - r + r

- 1092A10 Crankshaft services PULLEY - R.R.

- 1092B60 alternator drive belt - r + r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 1056B60 single fuel manifold pipe, with injectors - r + r

- 1048A10 air cleaner filtering element - replace

Remove the vehicle from the lift.

1.6 16v

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1036G49 rear camshaft seal, lh or rh - r r with mount and coil/s removed

- 1092A10 Crankshaft services PULLEY - R.R.

- 1032D12 timing system protective cover(s) - r + r

- 1008A46 cam shaft left rigid mount - r r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1092B50 alternator/air conditioner compressor drive belt - adjust tension

- 1092B54 alternator/water pump drive belt - adjust tension

- 4450B10 Front WHEEL (one) - R.R.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 7055B54 under-engine guard - r r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 1016A10 sound-proofing cover - r + r

Remove the car from the ramp.

2.4 20v

- 1032B44 toothed drive pulley - r + r with timing belt removed

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement

- 1016A40 ignition coil cover on cylinder head- r+r

Connect the battery negative terminal lead.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 1092B68 belt from a/c compressor to alternator drive r + r

- 1092D10 air conditioner compressor drive belt - r + r

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

- 7055B54 under-engine guard - r r

- 4450B04 right front wheel r r

- 0010T20 coolant change

- 7055B54 under-engine guard - r r

Remove the vehicle from the ramp.

1.9 JTD 16v

- 1032B44 toothed drive pulley - r + r with timing belt removed.

- 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

- 1032D12 timing system protective cover(s) - r + r.

- 1092G21 engine component single belt fixed tensioner - r rwith belt removed

- 1092G14 engine component single belt mobile tensioner - r + r.

- 1092G10 single engine belt r r.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R..

- 7055B54 under-engine guard - r r.

Connect the battery negative terminal.

- 1016A10 sound-proofing cover - r + r.

- 4450B04 right front wheel r r.

Remove the vehicle from the lift.