Engine oil level sensor - r + r
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Engine lubrication system › Engine oil level sensor - r + r
Engine oil level sensor - r + r
Removing
Place the car on a ramp.
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Disconnect the battery negative terminal.
Raise the lift.
1. Disconnect the electrical connection from the switch.
| Name | Connector | |
|---|---|---|
| 1 | Engine oil level sensor | K32 |
2. Undo and remove the engine oil pressure warning light switch.
Removing
Place the car on a lift.
Disconnect the battery negative terminal.
Raise the car.
- 7055B54 under-engine guard - r r
1. Disconnect the electrical connection for the engine oil level sensor.
| Name | Connector | |
|---|---|---|
| 1 | Engine oil level sensor | K32 |
2. Undo and remove the engine oil level sensor.
Refitting
Fit the engine oil pressure warning light switch.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Sensor | OIL LEVEL DIPSTICK SENSOR | M12 x 1.25 | 3 |
Connect the electrical connection
| Name | Connector | |
|---|---|---|
| Engine oil level sensor | K32 |
Lower the lift.
Connect the battery negative terminal.
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Remove the vehicle from the ramp.
Refitting
Fit the engine oil level sensor.
Connect the electrical connection for the engine oil level sensor.
| Name | Connector | |
|---|---|---|
| Engine oil level sensor | K32 |
- 7055B54 under-engine guard - r r
Lower the vehicle.
Connect the battery negative terminal.
Remove the vehicle from the lift.
Parts & tools for this job For 2001 Fiat Stilo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.