Emgine oil intake duct - r r

Operation 1084B26 · Engine oil lubrication circuit

1.2 16v

Removing

Place the car on a ramp.

- 7055B54 under-engine guard - r r

- 1048A10 air cleaner filtering element - replace

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1072C16 exhaust manifold with catalytic converter - r r

- 1020A30 engine oil drain plug - replace

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

1.4 16v

Removing

Place the car on a lift.

- 7055B54 under-engine guard - r r

- 1048A10 air cleaner filtering element - replace

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1072C16 exhaust manifold with catalytic converter - r r

- 1020A30 engine oil drain plug - replace

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

2.4 20v

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Disconnect the battery negative terminal.

- 1016A40 ignition coil cover on cylinder head- r+r

- 7055B54 under-engine guard - r r

- 1084A16 oil dip stick pipe - r r

- 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r

- 1020A20 crank case oil sump - r + r clean seals for sealant application.

- 1084B28 engine oil intake pump - r + r with crankcase sump removed.

1.9 JTD 16v

This operation should be carried out with the engine at the bench. After having remove the power unit, separate the gearbox - differential unit from the engine and position the latter on the rotating stand for overhauling.

Remove the engine oil sump and then the engine oil intake referring to the operations illustrated in the manual for overhauling this engine type at the bench.

1.2 16v

Refitting

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1020A30 engine oil drain plug - replace

- 1072C16 exhaust manifold with catalytic converter - r r

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1048A10 air cleaner filtering element - replace

- 7055B54 under-engine guard - r r

- 0010T11 engine oil check level and top up

1.4 16v

Refitting

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1020A30 engine oil drain plug - replace

- 1072C16 exhaust manifold with catalytic converter - r r

- 1072C44 exhaust manifold heat shield on bulkhead - r+r

- 1048A10 air cleaner filtering element - replace

- 7055B54 under-engine guard - r r

- 0010T11 engine oil check level and top up

2.4 20v

Refitting

- 1084B28 engine oil intake pump - r + r with crankcase sump removed.

- 1020A20 crank case oil sump - r + r clean seals for sealant application.

- 1084A16 oil dip stick pipe - r r.

- 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r

- 7055B54 under-engine guard - r r

- 1016A40 ignition coil cover on cylinder head- r+r

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..