Workshop Manuals Factory service & repair Land Rover
Land Rover Defender 90 Workshop Manual (NAS)07 · Engine
07 · Engine

CAUTION: Plug the connections. (page 2 of 5)

Make
Land Rover
Model
Defender 90 Workshop Manual (NAS)
Section
Repair
EngineCAUTION: Plug the connections. · page 2 of 5
Diagram
  1. Position engine lifting bracket and secure with 3
  2. Remove 3 bolts securing PAS pulley and remove pulley. 28. Raise vehicle on ramp.
  3. Remove 6 nuts securing exhaust front pipe to
  4. Remove front bolt securing RH catalyst heat
Remove front bolt securing RH catalyst heat
  1. Release knock sensor harness clip from PAS return hose.
  2. Remove 3 bolts securing PAS pump and position aside.
  3. Collect engine lifting bracket. 31. Remove bolt securing starter motor heat shield
  4. Release starter motor heat shield clip from
  5. Release exhaust front pipe from manifold studs
  6. Remove starter motor heat shield.
Remove starter motor heat shield.

(3/8’’ UNC x 1’’ MAX) bolts.

manifolds.

shield to chassis.

shield to chassis.

to RH engine mounting bracket.

solenoid.

and remove and discard gaskets.

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.