Starting and charging – fault diagnosis

STARTING AND CHARGING – FAULT DIAGNOSIS

STARTING AND CHARGING TROUBLESHOOTING HINTS

1. If the Starter Solenoid (K136) does not click, check the Park/Neutral Position Reverse Switch (X167) and the Theft Alarm Unit (Z163).

SYSTEM DIAGNOSIS

1. If the Starter Solenoid (K136) does not click and the engine does not crank, do Test A. 2. If the Starter Solenoid (K136) clicks but the engine does not crank or cranks slowly, do Test B. 3. If the charge warning light does not light with the engine off and the Ignition Switch (X134) in position II, do Test C. 4. If the charge warning light stays lit with the engine running, do Test D.

E L E C T R I C A L T R O U B L E S H O O T I N G

8

M A N U A L