Discovery II
FRONT SUSPENSION
60-34
REPAIRS
11. Position the wheel hub and drive shaft on a
press, place supports beneath the wheel studs
and press the drive shaft from the wheel hub.
12. Remove drive shaft oil seal from axle casing.
Refit
1. Clean drive shaft oil seal recess, drive shaft
splines, oil seal running surface, wheel hub
and steering knuckle mating faces, ABS
sensor and sensor recess.
2. Lubricate lip of new drive shaft oil seal and
running surface on drive shaft with clean
differential oil.
LUBRICANTS AND SEALANTS,
Lubrication.
3. Use tool LRT-51-012 to fit new drive shaft oil
seal to axle casing.
4. Fit drive shaft to axle casing.
5. Apply anti-seize compound to wheel hub and
steering knuckle mating face.
M51 0057