Discovery II
TRANSFER BOX - LT230SE
REPAIRS
41-33
Gasket - rear cover plate
$% 41.20.30
Remove
1. Mark rear cover to bearing housing for
assembly purposes.
2. Note fitted position of stud nut, remove stud nut
and 5 bolts securing rear cover.
3. Carefully release rear cover from bearing
housing.
Refit
1. Clean rear cover, mating face on bearing
housing and sealant from stud/bolt threads.
2. Apply sealant Part No. STC 4600 to rear cover
mating face.
3. Align reference marks and position rear cover.
4. Apply sealant, Part No. STC 50552 to stud/bolt
threads, fit rear cover plate stud nut and bolts
and tighten to 25 Nm (18 lbf.ft).
5. Top-up transfer box oil.