Discovery II
TRANSFER BOX - LT230SE
41-36
REPAIRS
Oil seal - input shaft
$% 41.20.50
Remove
1. Remove transfer box.
REPAIRS, Transfer box - Diesel.
2. Lever input shaft oil seal from transfer box.
Refit
1. Clean oil seal recess in transfer gearbox.
2. Using tool LRT-37-014 fit input shaft seal to
transfer box.
CAUTION: Oil seal must be fitted dry.
3. Fit transfer box.
REPAIRS, Transfer box - Diesel.
Seal - front output shaft
$% 41.20.51
Remove
1. Position vehicle on 4 post ramp.
2. Remove front propeller shaft.
3. Restrain transfer box drive flange using tool
LRT-51-003. Remove and discard drive flange
nut, remove and discard steel and felt washers.
4. Using tool LRT-99-500 if necessary, remove
drive flange from transfer box.
