Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Carpet - loadspace

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Interior trim components › Carpet - loadspace
BodyCarpet - loadspace

CARPET - LOADSPACE

Service repair no - 76.49.04

Remove

  1. Remove both rear quarter lower trim casings. See this section.
Carpet - loadspace – Remove both rear quarter lower trim casings. See this section.
  1. Open lid on security box.
  2. Remove 6 screws securing lid.
  3. Remove lid.
  4. Remove 4 screws securing lid latch strikers.
  5. Remove both strikers.
Carpet - loadspace – Remove both strikers.
  1. Release carpet from rear seat strikers and lashing eyes.
  2. Remove 4 buckles from rear carpet.
  3. Remove carpet.

Refit

  1. Position carpet in loadspace.
  2. Fit buckles to rear carpet.
  3. Fit lid latch strikers and secure with screws.
  4. Fit lid and secure with screws.
  5. Close lid.
  6. Fit rear quarter lower trim casings. See this section.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.