Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Models with sun roof:

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Interior trim components › Models with sun roof:
BodyModels with sun roof:
Diagram
  1. Release roof lamps, disconnect multiplugs and remove roof lamps.
Release roof lamps, disconnect multiplugs and remove roof lamps.
  1. Release both B/C’ post upper finishers and position aside.
  2. Release headlining from front and rear door aperture seals.
Release headlining from front and rear door aperture seals.

Models with sun roof:

  1. Release and remove sun roof surround finisher from sunroof aperture.
Models with sun roof: – Release and remove sun roof surround finisher from sunroof aperture.

All models:

  1. Remove 5 retaining studs from headlining.
  2. With assistance remove headlining through tail door.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.