Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Headlining - 3 door

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Interior trim components › Headlining - 3 door
BodyHeadlining - 3 door · page 1 of 2

HEADLINING - 3 DOOR

Service repair no - 76.64.15

Remove

  1. Fold front seat squabs forward.
  2. Remove both sun visors. See this section.
  3. Remove both ’A’ post trims. See this section.
Headlining - 3 door – Remove both ’A’ post trims. See this section.
  1. Remove 2 screws from both sun visor clips and collect clips.
  2. Remove 2 screws securing headlining to front end of roof panel.
Headlining - 3 door – Remove 2 screws securing headlining to front end of roof panel.
  1. Remove roof lamp lens.
  2. Remove 2 screws, release roof lamp and disconnect multiplug.
  3. Release headlining rear finisher from roof panel and remove finisher.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.