Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Sun visor

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Interior trim components › Sun visor
BodySun visor

SUN VISOR

Service repair no - 76.10.47

Remove

Sun visor – Service repair no - 76.10.47
  1. Release sun visor from retaining clip.
  2. Remove 2 screws securing sun visor.
  3. Remove sun visor.

Refit

  1. Fit sun visor and secure with screws.
  2. Secure sun visor in clip.

FINISHER - ’A’ POST

Service repair no - 76.13.07

Remove

Finisher - ’a’ post – Service repair no - 76.13.07
  1. Release seal from door aperture.
  2. Release 4 clips and remove ’A’ post finisher.
  3. Remove clips from finisher.

Refit

  1. Fit clips to ’A’ post finisher.
  2. Fit finisher to ’A’ post and secure with clips.
  3. Fit seal to door aperture.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.