Workshop Manuals Factory service & repair Land Rover
Land Rover Freelander Body Repair Manual (1998 on)06 · Panel repairs
06 · General

For both sides

Make
Land Rover
Model
Freelander Body Repair Manual
Year
1998 on
Section
Repairs › For both sides
Panel repairsFor both sides

For both sides

  1. Fit headlamp. See ELECTRICAL, Repairs. Secure headlamp wiring.
  2. Fit PAS fluid cooler. See STEERING, Repairs.
  3. Fit radiator. See COOLING SYSTEM, Repairs.
  4. Fit front bumper support bracket.
  5. Fit front bumper valance. See BODY, Exterior fittings.
  6. Fit front wing. See BODY, Exterior fittings.
  7. Fit front wheel arch liner. See BODY, Exterior fittings.
  8. Fit road wheel(s) and tighten nuts to correct torque. See INFORMATION, Torque wrench settings.
  9. Connect all ECUs.
  10. Connect alternator. See ELECTRICAL, Repairs.
  11. Connect battery earth lead.

VALANCE OUTER REINFORCEMENT

Remove

  1. Disconnect battery earth lead.
  2. Disconnect alternator. See ELECTRICAL, Repairs.
  3. Disconnect all ECUs.
  4. Remove road wheel(s).
  5. Remove front wheel arch liner. See BODY, Exterior fittings.
  6. Remove front wing. See BODY, Exterior fittings.
  7. Remove front bumper valance. See BODY, Exterior fittings.
  8. Remove headlamp. See ELECTRICAL, Repairs.
  9. Release wiring from valance and position aside.

For LH side

  1. Remove battery. See ELECTRICAL, Repairs.
  2. Remove tool kit.
  3. Remove ECM.
  4. Remove relay module. See ELECTRICAL, Repairs.
  5. Remove battery carrier. See ELECTRICAL, Repairs.
  6. Remove engine compartment fuse box and related wiring.

For RH side

  1. Remove PAS fluid reservoir. See STEERING, Repairs.
  2. Remove brake pipes from valance.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.