Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Restraint systems05 Body06 Panel repairs
Land Rover Freelander Body Repair Manual (1998 on)06 · Panel repairs
06 · General

For LH side

Make
Land Rover
Model
Freelander Body Repair Manual
Year
1998 on
Section
Repairs › For LH side
Panel repairsFor LH side

Refit

For LH side

  1. Fit tail door striker.

For RH side

  1. Fit fuel tank. See FUEL DELIVERY SYSTEM, Repairs.
  2. Fit fuel filler neck. See FUEL DELIVERY SYSTEM, Repairs.
  3. Fit tail door. See BODY, Doors.

For both sides

  1. Secure vehicle harness to ’E’ post.
  2. Fit loadspace carpet. See BODY, Interior trim components.
  3. Fit rear quarter lower casing. See BODY, Interior trim components.
  4. Fit tail door aperture seal.
  5. Fit soft/hard top.
  6. Fit tail lamp. See ELECTRICAL, Repairs.
  7. Fit rear wheel arch liner.
  8. Fit rear bumper valance. See BODY, Exterior fittings.
  9. Fit road wheel(s) and tighten nuts to correct torque. See INFORMATION, Torque wrench settings.
  10. Connect all ECUs.
  11. Connect alternator. See ELECTRICAL, Repairs.
  12. Connect battery earth lead.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.