L322 Range Rover Service Procedures
HARNESSES
86-8-4
REPAIRS
16. Disconnect 6 multiplugs from glow plugs.
17. Remove 2 nuts securing engine harness to
starter motor.
18. Disconnect multiplug from damping control
actuator.
19. Disconnect multiplug from EGR modulator,
remove 2 nuts and place modulator aside.
20. Disconnect multiplug from low pressure sensor,
positioned on fuel filter.
21. Disconnect multiplugs from fan assisted fuel
cooler and thermostatic switch.
22. Release fuel cooler harness from retaining clip.
M86 5898
M86 5899
M17 0297
M86 5900
