L322 Range Rover Service Procedures
HEATING AND VENTILATION
80-2
REPAIRS
Sensor - pollution detection
$% 80.10.09
Remove
1. Disconnect battery earth lead.
2. Remove engine cover.
ENGINE - Td6, REPAIRS, Cover -
3. Disconnect multiplug from sensor.
4. Release and remove pollution sensor.
Refit
1. Fit pollution sensor and connect multiplug.
2. Fit engine cover.
ENGINE - Td6, REPAIRS, Cover -
3. Connect battery earth lead.
Motor - windscreen air vent
$% 80.10.36
Remove
1. LHD models: Remove glove box.
2. RHD models: Remove RH footwell closing
Closing panel - passenger side.
3. Disconnect multiplug from motor, remove
motor from heating assembly.
Refit
1. Fit motor to heating assembly, connect
multiplug.
2. LHD models: Fit glove box.
3. RHD models: Fit RH footwell closing panel.
Closing panel - passenger side.
M80 0530
